▓▓▓▓▓▓▓▓▓▓▓▓▓▓ -> Floor -> Open Space Floor (an Ice wall creates an Ice floor here) Occur on at least 2 z-levels, as an open space wall section with an open space floor section, and in the lowest z-level another open space wall section (filled with water) with a murky pool floor section, the lower open space wall section can fill with rain water and during winter with an ice wall ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ -| -| There are some naturally-occurring special tiles, these can't be recreated :
Dwarf fortress tileset help windows#
Windows and doors both block fluids (doors only when closed). Statues block normal movement, but not unintended movement (dodging, being thrown, swept by current, etc). Note, however, that fully submerged (depth of 7/7) fortifications no longer block creature movement. Unlike walls, supports span only one z-level, allow liquids and movement, and don't create a floor on top.Ĭonstructed fortifications are basically the same, but block movement as well. ▓▓▓▓▓▓▓▓▓▓▓▓▓▓ -> Natural or Constructed Floor -> Open Space Floor (or Down Stair) The floor above the wall can become "open space" by two methods: felling a tree above the wall, and digging a down stair above the wall, which is technically "open" (by exposing the tile below). Smoothed and engraved walls span across only one z-level, the bottom wall section and floor. ▓▓▓▓▓▓▓▓▓▓▓▓▓▓ -> Floor ▓ ▓▓▓▓▓▓▓ -> Down Stair -|īoth naturally-occurring and constructed walls span across two z-levels, the bottom wall section and floor and the top floor section: ▓▓▓▓▓▓▓▓▓▓▓▓▓▓ -> Floor ▓▓▓▓▓▓▓▓▓▓▓▓▓▓ -> FloorĪn up-down stair, or building both up and down stairs in the same tile, works like this: When digging and building, this is important, since some designations and constructions will only be done in wall tiles and others will only be done in floor tiles.īuilding a stairway consists of two elements: an up stair and a down stair, each element is built only in the matching tile section, across two z-levels, like this: As worlds can have between 17 and 257 region map tiles, a world in Dwarf Fortress is between 20 and 300 miles (32 and 481 kilometers) across with a maximum area of 89,434 square miles (231,632 kilometers squared)– which is about 4% smaller than the United Kingdom.Ī tile consists of two sections-a wall section and a floor section, shown in cross-section like this: A single region map tile (the maximum embark size) would contain 768×768 embark tiles (approx. 16×16 local tiles, the maximum embark size, covers a region map tile. There are 48×48 tiles in a 1×1 embark this is also the scale of overland travel tiles in adventure mode.
However, the physics calculations assume a tile size of 2.8 meters high and a tick rate of 10 ticks per second, and from the listed speeds (in km/h) and gaits (ticks per 100 tiles) and the tick rate of 10 ticks per second, a tile would be about 8x8 feet (2.4×2.4 meters). They are approximately two meters long, two meters wide, and three meters high. For a list of all tile characters used in DF, see Tilesets.
0 kommentar(er)
